Ideal for charging and maintaining lead acid flooded and sealed batteries. Use for RV's, boat batteries, lift batteries, Atv’s, snowmobiles, ice shack batteries, etc. that are stored for periods of time without use.
15 watt 12 volt solar battery charger, SP15WCESI, is a portable 12 volt panel for RV’s, Boats, lifts, ice shacks and other applications where power is not available. These panels are ideal for charging and maintaining 12 volt batteries and systems. This 15 watt panel is a high efficiency mono crystalline panel giving high efficiency power conversion of solar light into electricity, even in cloudy conditions.
These panels are ideal for maintaining a charge on a 12 volt battery. When combined with our 10 amp, 12 volt solar controller, it will charge and maintain a charge on a 12 volt battery. This helps to keep the batteries in top condition, extending battery life and increasing the response time of the battery. The panel can maintain this charge on up to three batteries at once. The panel comes with approximately 8’ of wire, a 12 volt plug in, battery terminal clamps, and eight various plugs for charging a variety of items.
We have access to many other solar panels of a variety of out put levels. The range from 2 watts, up to 240 watts per panel. Call us with your requirements and we will work up a quotation for your needs. These panels can be mono- crystalline, polycrystalline or amorphous type panels. Minimums do apply.
| Maximum power (Wp) |
15W |
| Maximum power voltage (V) |
17.2 |
| Maximum power current (A) |
0.88 |
| Open circuit voltage (V) |
21.6 |
| Short circuit current (A) |
1.06 |
| Size of module (mm) |
465*295*25 |
| |
|
| Maximum system voltage (V) |
1000 |
| Temperature coefficients of Isc (%) |
+0.1/C |
| Temperature coefficients of Voc (%) |
-0.38/C |
| Temperature coefficients of Pm (%) |
-0.47/C |
| Temperature coefficients of Im (%) |
+0.1/C |
| Temperature coefficients of Vm (%) |
-0.38/C |
| Temperature Range |
-40C---85C |
| Tolerance Wattage (e.g. +/-5%) |
± 3% |
| Surface Maximum Load Capacity |
60m/s (200kg/sq.m) |
| Weight per piece (kg) |
2.2 |
| Junction Box Type |
PPO, black |
| Connectors and Cables Type |
4mm2 |
| Length of Cables (mm) |
300 |
| Cell Efficiency (%) |
16 |
| Frame (Material, Corners, etc.) |
Anodized Aluminum Alloy |
| Standard Test Conditions |
AM1.5 100MW/c M2 25C |
| Warranty |
24 months |
| Guarantee of power |
90% for 10years, 80% for 25years. |
* Charge Controllers are recommended for panels 5 watts and higher. |
|
